Semi-transparent silicate dispersion stain for interior or exterior use

For use on absorbent mineral based surfaces such as brick, stone, concrete, block, mortar joints and other masonry substrates

Can be diluted to any degree with 1050 PrimaSil to increase transparency and allow variation to show in the finish promoting a natural appearance

Available in over 150 standard colors – custom color matching available

Dry to touch in approx. 2 hours, wait a minimum of 12 hours before re-coating although 24 hours is ideal

Covers approx. 200 – 240 sq ft per gallon (varies on surface absorbency)

Fully breathable, anti-microbial, mildew resistant

100% Non-Hazardous, allow to dry out and dispose of with regular garbage

Non-Flammable, 0 VOC

Non-Film forming, bonds by chemical reaction on the inside of the substrate

Will never blister or peel

Apply with brush, roller or sprayer (back roll if spraying)

Apply an even coat and allow to absorb into surface – soak up excess

Wash tools with water

Minimum application temperature is 5 C or 40 F and above

10 year product replacement warranty – 30-40 year lifespan